High strength epoxy injection grout offering low mixed viscosity and fast hardening to produce a bonding matrix exhibiting excellent adhesion and high compressive and tensile strength. High strength epoxy is ideal for pressure injected structural repair of cracked and damaged concrete. When High strength epoxy hardens it adheres tenaciously to all concrete elements and the complete structure is restored to its original monolithic condition.
High strength epoxy will penetrate into some crack by capillary action, or, in more critical applications, may be applied by pressure injection to cracks down to 0.2mm. High strength epoxy will also bond to damp surfaces.
Let’s proceed on the assumption that you’re taking out an individual construction loan. Such loans, which can be tough to get without a previous banking history because of the lack of collateral (a finished home), have special guidelines and include monitoring to ensure timely completion so your repayment can begin promptly.
Areas of application:
- Crack Filling
- Rod fitting
- Columns crack
- Fine gap grouting
- High viscosity access
- Deep penetration
- Bonds to damp surf
- Solvent free
- High strength
Appearance of compound : Amber liquid + powder
Mixing proportions by weight or Volume : 1 Hardener to 2 Compound
Solids Content : 100%
Work Time : 30 minutes at 25° C
Cure Time : 24 hours at 25°C
Initial Mixed Viscosity : 0.3 Pa.s
Density : 1.08 g/cm³
Water Permeability : 4 x10-17
Resistance to Chloride ion Penetration : Good
Mixing Ratio : 60:40
Coverage : 1 Liter BiRAT-HSE 16mm dia Rod 20 non.
Depth : 5/6 Inch
Packing : 1 kg Pack